WORKS ON RIMS AND BODYWORK
QUICK DECONTAMINATION
EASY TO USE
FALLOUT
iron remover
REMOVES IRON RESIDUES FROM CAR BODYWORK AND ALLOY RIMS
REMOVES IRON RESIDUES FROM CAR BODYWORK AND ALLOY RIMS
WORKS ON RIMS AND BODYWORK
quick decontamination
easy to use
Iron particles that have built up on the car’s bodywork or penetrated into paint on the rims are impossible to remove with traditional cleaning methods.
Fallout Iron Remover 500 ml has been specially developed to remove what traditional rim cleaners are unable to remove. The product is highly effective and acid-free, ideal for all steel and light alloy rims and also chrome-plated and polished rims. Thanks to its innovative formula, it chemically converts and dissolves iron residue that has penetrated the paint, creating a purple solution that can be easily and safely rinsed away.
The product is non-toxic, has a balanced pH and can be used on the bodywork, for example for cars that have been parked near rail or tram stations. The product has a distinctive sulphuric odour, so we suggest using it in well-ventilated, open spaces.
RESULTS ARE GUARANTEED!
FALLOUT
LOOK AT WHAT YOU CAN ACHIEVE!
LEARN HOW TO CLEAN CAR RIMS AND BODYWORK
WITH FALLOUT BY MAFRA
GUARANTEED RESULTS EVEN ON YOUR CAR'S BODYWORK!
STEP 1
Wash and dry the car.
STEP 2
Dispense the product from a distance of 60 cm to have a good range of action. Proceed panel by panel, half of the car at a time, to prevent the product from drying on the paint.
STEP 3
Wait 2/3 minutes for the product to react with the iron particles. It will take on a distinctive purple colour, after which it can be rinsed off.
FALLOUT
To clean wheel rims, follow these simple steps to get the most out of the product
STEP 1
SPRAY THE PRODUCT ON THE RIM YOU WISH TO TREAT
Spray Fallout Iron Remover on the rim and leave it to work for 3-4 minutes but without allowing the surface to dry.
Its innovative formula is distinguished by a special indicator that reacts with iron particles present on the rim and dissolves them.
STEP 2
WAIT FOR A FEW MINUTES
Use a brush to remove any ingrained dirt, also between spokes and in hard-to-reach cracks.
As it takes effect, it takes on a distinctive purple colour, dissolving particles and at the same time degreasing the treated surfaces deep down.
STEP 3
RINSE THE TREATED SURFACE
Then rinse the rim well with water and dry with a microfibre cloth.
STEP 4
DRY WITH A MICROFIBRE CLOTH
Lastly, dry the rim with a clean microfibre cloth.
